OK here you go. Again I apoligize but my camera blows. Could somebody maybe tell me about a mode or setting on the camera that would allow me to take "up close" type pics? Anyway maybe these pics will help. I think that a person should start with the area where the linkage hits the upper deck and work out from there. Also I'll try to get a before and after if I can find the pics from when I built the SS and "thought" it had some serious steering throw. The first pic of the wheel is the stock set up the second pic is after grinding clearence. The red on the hub is basically where I did the grinding there. My red didn't turn out on the upper deck pic but you can see where it has been ground off at the corner to allow for the linkage. Oh and theres a pic of my lid too!!

OK now I've got a pic of the deck modding with a nifty red circle!