Hey guys,

I'm having a Jurrasic Jet ( http://www.altecare.com/jurassic.html ) built for me and I need to decide on what servos to use for the elevators. The problem is, the elevator servo pockets (in the stabs) are only 0.55" thick.

Probably the two best alternatives are:

Futaba S3150 Digital

Torque: 51.4 oz-in @ 4.8V
Dimensions: 1.1x0.5x0.8 in (28x13x19.7mm)

http://www2.towerhobbies.com/cgi-bin...&I=LXFLA0&P=SM


or

JR DS368BB Digital

Torque: 53 oz/in @ 4.8V
Dimensions (WxLxH): .50 x 1.12 x 1.21

http://www.horizonhobby.com/Products...odID=JRPS368BB


Also, there's the JR thin wing digital:

JR DS168 Digital Thin Wing

Torque: 47oz @ 4.8V ; 53oz @ 6.0V
Dimensions (WxLxH): 0.34 x 1.33 x 1.18 in

http://www.horizonhobby.com/Products...ProdID=JRPS168



Any thoughts on which is best or if these have enough torgue for the job? Any other alternatives I should consider?

Thanks!
Bob