Hi there all,

From time to time I came up with different topics and different questions. As I have quite a stock of those questions therefore from time to time I come up with those and get benefitted from all you senior people's experiences.

My questions is when any 2 Stroke engine or 4 Stroke engine requires to be disassembled taken out everything then put everything back together and start using again. One thing I understand is cleaning, take the gunk out of it, or some kinda other impurities/pebbles which may get into the engine while flying or taxiing on the ground or grass.

Second thing I have been flying for more than 1 and half year and I can fit servos, install engine, tank etc, I mean I can make an ARF ready or RTF but would need some time to make a kit. I have never disassemble any engine. I would like to disassemble the engine and I wanna see inside, clean it and then assemble it back again. Is it easy to do that or not, if a person like me has never done it before, does he require to have a guidance of a senior or can do it on his own in order to learn and get hand on experience. As it is said, one can never know the depth of water until he/she steps into it.

Please guide and have your feed back

Thanks in advance

Mody