RCU Forums - View Single Post - Buiding the 33% Waco YMF-5 Barth Modellbau
Old 06-18-2007, 10:43 PM
  #189  
SoCalSal
My Feedback: (16)
 
Join Date: Mar 2005
Location: spring valley , CA
Posts: 1,309
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Buiding pics Waco YMF-5 Barth Modellbau

Steve very good photos and thank you for them. I looked at them for a few seconds and saw something strange to me............. I then spoted the spinner. I have never saw that type of spinner on a Waco before. Not bad.............just different.
SoCalSal Brotherhood #46
AKA>Steve as well
ORIGINAL: skylarkmk1

Steve,

If you can find a copy of the Historic Aviation Album YMF drawings by Paul Matt (NC 14031, the Pica Kit subject), they would be a start on your documentation for an orginal YMF and the newer YMF Classic by WACO Classic Aviation. The YMF Super is longer and wider and would require new drawings, formers and such. I just returned from the 2007 American WACO Club Fly-In at Creve Coeur Airport and only 1 YMF was there. I did take over 100 photos of NC 14081 (a 1987 YMF Classic, ser # F5-009), both flying and on the ground. In the 1st photo, note the rectangular exaust ports at the bottom rear of the cowl.