I'm not sure if the Ti on my DF is working properly. These are the steps i take, but if I ever push the DF in a direction, or the wind blows it, it never returns to a stable flight. It will keep going until it crashes.

1.) Turn on the Ti switch on Tx and then turn on the Tx.
2.) Turn on the DF.
3.) Hold the throttle stick to the bottom LEFT and press the arming button.
4.) Pick up the DF by the base, point the eyes to the sky, and press the arming button.
5.) After placing it on the floor, step back about 15 feet and hold the Tx stick to the bottom RIGHT.
6.) Fly with no help....

Am I missing something, or doing something wrong?

I noticed this also, regardless of if the TI is ON or OFF (and armed), when I turn the DF motors on and wiggle it in my hands, there is some type of feedback from the motors and they give a response based on the direction I move the DF. But again, that is regardless of if I have the Ti on or off.

Please help....