Hi Bill,

I received my twinsync, upon trying to program it, it seems that one of the red LED's and one of the yellow LED's do not turn on at the device itself - making it hard to program - setting the selector switch to position 6, has some very interesting results - the 2 LED's that work for the programming just do their own thing. please see the picture below for the twinsync i was supplied - it's a large image, this is on purpose because i believe the soldering on the led's is badly done - i think they are shorting themselves. I'm not sure what other effects this might have on the unit.

[link=http://www.nandos.eu.org/gallery/planes/cessna310/IMG_2041.JPG.html?g2_imageViewsIndex=1]http://www.nandos.eu.org/gallery/planes/cessna310/IMG_2041.JPG.html?g2_imageViewsIndex=1[/link]

I've further discovered, using the display, and having both sensors being affected by a magnet (the green led's work) .. only 1 RED flashes showing that the glowplugs are not working correctly (i havent connected them yet) - also, nothing but 0000 appears on the display.

Any help would be greatly appreciated.

Thanks,
Rob