Bill--I have strange & unwanted behavior with my 9C. When I am holding full up elevator (2 servos ch2 & ch8 ailvator) and move the rudder thru it's movement right to left and left to right when the rudder gets almost to it's full deflection in either direction the elevators suddenly reduce their deflection while I'm still holding full up. This only happens on high rate. I went thru all the menus and can't find any mixes set up I don't know about. It's almost like there is a rudder to elevator mix on with OFFSET set at about 90% of the rudder travel. I have a contest coming up soon and I need to get this resolved. Please help.--Thanks