RCU Forums - View Single Post - Hanger 9 Evolution .46 engine question
Thread: Hanger 9 Evolution .46 engine question
View Single Post
Old 07-19-2007 | 11:02 AM
  #3  
Insanemoondoggie's Avatar
Insanemoondoggie
 
Joined: Nov 2006
Posts: 2,475
Received 1 Like on 1 Post
From: Altamont, MO
Default RE: Hanger 9 Evolution .46 engine question
bkdavy is right, I have the same engine , changed to a 11x6 2 blade APC prop and got 13.000 plus rpms with the flywheel on.
I switch between the flywheel or the spacer , it depends on what the airframe needs for balance.
Insanemoondoggie is offline  
Reply Like