I noticed that the voltage limits on my 25A esc for my 3100kv brushless motor are 9.2v - 14.8v. This does not seem right to me and I've been experiencing problems with motor stuttering and cutting off after only a miute or so. shouldn't the low voltage limit be more like 5v? As the battery starts to drain to 9v and below dropping below the low limit of 9.2v of this esc wouldn't that effect the motor operation. I am not very knowledgeable in electrical theory but it seems like I got the wrong esc for this motor and should have one more like 14.2 or so as the high and 5v as the low. any input on this subject would be appreciated.