RCU Forums - View Single Post - Making propshafts
Thread: Making propshafts
View Single Post
Old 08-13-2007 | 05:09 AM
  #2  
mfr02
 
Joined: Jul 2007
Posts: 1,432
Likes: 0
Received 33 Likes on 33 Posts
From: Blackpool Lancs, UNITED KINGDOM
Default RE: Making propshafts
Have a look in this site
http://www.towboatjoe.com/
I have used a similar method successfully for years. Good tip - do not use aluminium tube for the bearings. It corrodes and welds itself to the shaft.
mfr02 is offline  
Reply Like