RCU Forums - View Single Post - Making propshafts
Thread: Making propshafts
View Single Post
Old 08-14-2007 | 01:42 AM
  #6  
Umi_Ryuzuki's Avatar
Umi_Ryuzuki
 
Joined: Dec 2003
Posts: 1,664
Likes: 0
Received 1 Like on 1 Post
From: PDX, OR
Default RE: Making propshafts
The tubing has about 1/64 inch (0.4mm) wall thickness. the sizes gradiate at 1/32nd inch(0.8mm) steps.
Umi_Ryuzuki is offline  
Reply Like