RCU Forums - View Single Post - Zip tie in Glow tank
Thread: Zip tie in Glow tank
View Single Post
Old 08-24-2007 | 01:54 PM
  #7  
scratchonly
Senior Member
 
Joined: Jun 2006
Posts: 950
Likes: 0
Received 0 Likes on 0 Posts
From: winnipeg, MB, CANADA
Default RE: Zip tie in Glow tank
Rotate some 220 sandpaper on the brass tube to roughen it slightly; never had one fail. Remember to leave about 3/8" space from the rear of the tank to the clunk.
scratchonly is offline  
Reply Like