RCU Forums - View Single Post - Interference, engine on - orientation dependent.
Old 03-05-2002 | 01:38 AM
  #11  
Knife-edge
Member
 
Joined: Feb 2002
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
From: Mukwonago, WI,
Default Interference, engine on - orientation dependent.

Although Glowplugboy came down from the mountain with the
"3 gas radio installation comandments" ,what do you do if these
suggestions do not help??? The bosch cap fixed 90% of my glitches,making a plane that would glitch on the ground at 50ft.
to one that was flown over 50 times sucessfully.Now the bad
news, ALOT has been writtien about Futaba radios having less
than stellar output and are much more likely to have glitches
in certain installations.Some are blaming receiver filters,others
say it is poor T.X. output.I fly only Futaba,and still my gassers
glitch once in a while,while other flyers at the same field with
the same engine-plane combo,but different radio brands have
no problems at all...Any help or suggestions on this radio
problem would be nice. P.S I have tried 5 different Futaba
receivers with the same results...