RCU Forums - View Single Post - Elevator Aileron seperation problem
View Single Post
Old 08-26-2007 | 02:41 PM
  #2  
mrasmm
Senior Member
 
Joined: Jan 2007
Posts: 4,432
Likes: 0
Received 0 Likes on 0 Posts
From: Sometown, Northern Utah
Default RE: Elevator Aileron seperation problem

it's all good =)

that is actually called gyroscopic procession and is just a phenomina of heli's and rotating things in general. All hel's do this, and actually if you look at the cx2 you will see that the servo's are a good 135 degrees or so out of alignment where they should be if I remember right.

Give her a whirl and get her light on the skids, it will have a tendancy to drift left until you get it about 2 to 3 feet in the air, but if you still have problems with that, let us know and we'll help you from there =)

GL