RCU Forums - View Single Post - Haner 9 twist 60 problem
View Single Post
Old 09-17-2007 | 05:34 PM
  #10  
suzonka's Avatar
suzonka
My Feedback: (7)
 
Joined: Nov 2004
Posts: 901
Received 0 Likes on 0 Posts
From: Long Island, NY NY
Default RE: Haner 9 twist 60 problem


ORIGINAL: rmenke

Guys:

Keep in mind the 3D stuff is supposed to fly like you are describing, tail heavy. Otherwise it would not perform as well. You learned to land all your other planes after some practice. Suggest you spend one flight doing just landings to get it just right. Landing these thing are just another skill you need to learn. They will land very well once you get the hang of it. Honest. The forward CG is not a bad idea if you need to work up to landing control a little at a time. ENJOY
[:-]
Hi, Can you give us any tips on bringing in a twsit type 3D in on a windy day landing, they want to go up bloom up that is and when you give it a few rpms on the throttle it pulls straighter forward ,but wants to fly away and not on the ground.