RCU Forums - View Single Post - Hangar 9 Twist 3D Part II - Thread Continuation
Old 09-23-2007 | 10:29 PM
  #1383  
naswifty's Avatar
naswifty
Senior Member
 
Joined: Sep 2006
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
From: stockton, CA
Default RE: Hangar 9 Twist 3D Part II - Thread Continuation

Link- try an X-ACTO knife and use the blade backwards (sharp side away from direction of travel) and SLOWLY try to work the knife around the canopy. . .care and patience are manditory to keep from ripping the coating. . . the canopy should survive without any damage. . .
jeff