RCU Forums - View Single Post - F-16
Thread: F-16
View Single Post
Old 09-27-2007 | 06:57 PM
  #3  
nsmjim
My Feedback: (52)
 
Joined: May 2003
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
From: Macon, GA
Default RE: F-16

Wow- That is the first specific answer I've gotten. Unfortunately, I had ordered the Eflite 32 prior to reading your reply. if I had ordered the Monster 32 I could have gotten the same performance for half the price! Ouch []
I did however get the new Eflite 60 with BEC (2.5 amp) and for less than the Eflite 32 I can get the Monster 46. I just hit the "buy button"!
In my limited electric experience, I learned within a week to get a nice watt meter...well...that was after I smoked a ESC in my delta wing.

I have one other question on the F-16 if you can help. The instructions indicate you simply epoxy the horizontal stabs to the fuselage which in my experience would be fatal. They actually read to "blot the stab to the wing", which I think was supposed to mean "bolt the stab to the fuselage". There are four pins that I'm considering using for this that were included in the kit. Am I on the right track?

Thank you again for your expert help,

Jim

P.S. I sent an email to support today asking if the P-82 Mustang manual was available prior to my purchase. I wanted to see about retracts, etc. before I bought it.