RCU Forums - View Single Post - Cg for Edge 540
Thread: Cg for Edge 540
View Single Post
Old 02-27-2002 | 09:47 PM
  #2  
mglavin
My Feedback: (31)
 
Joined: Nov 2001
Posts: 5,295
Received 1 Like on 1 Post
From: Elverta, CA
Default Cg for Edge 540

Jim

I do not have specificv knoweledge of the particular model, however the rule of thumb is 25% of the root chord.

This means if the wing is 12" leading edge to trailing edge at the center section that 3" from the LE would be a good starting place.

25% of 12" = 3"

This is wel proven figure and works well some guys use 30% as well.

Good luck