Hey all;
This is the greatest place to get information so I thought I'd ask the group, cause someones got to know. I am building Wendal Hostetlers Cessna 150 and I thought that I would hide the elevator pushrods inside the fuse. This requires a larger than normal elevator control arm. You know the one I'm talking about, piece of steel rod bent on both sides to go into the elevators with a control horn welded (soldered?) to the center for the servo to connect to! does any one know of where I can get a heavy duty one, OR have a suggestion on what to do. I do not want anything outside the fuse.

Patiently waiting for your responses

Michael Beckman