I think I've already said in one of my post that my plane is over weight do to the shims, servos, and the Saito 125 weighing less than the YS 110. As far as the wing span and length, my plane measures like I said, 63" from wing tip to wing tip and the fuse is 70" from the end of the rudder to the tip of the spinner. Weighing the plane with my bathroom scales is all I have and yes it is a crude way to get the weight but thats what I have and used. Thats why I didn't give an exact weight. I think rcpattern said something about Piedmont models being of the highest quality. Maybe I just got a bad one but my fuse was twisted, I had to sand the wings down to fit the fuse, the rudder was to long, the wheel axles were way to short, when I got the plane there was no packing inside the box and everything had been slamming into one another and there are dings and impressions on the fuse where the landing gear had been hitting it. I emailed Piedmont models twice and got no response so I gave up. Lesson learned. Like I said, maybe I just got a bad one but it will be the last one. I did run about 4 tanks of fuel through the Saito 125 today and everything is good to go. I have my hopes up and looking for an enjoyable maiden flight next weekend.