RCU Forums - View Single Post - threading pushrod
Thread: threading pushrod
View Single Post
Old 10-23-2007 | 07:24 AM
  #12  
Sonic1954
Junior Member
 
Joined: Oct 2007
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
From: Odessa, TX
Default RE: threading pushrod
The electrical solder works well for me also. Just be sure and shine the metal rod with sand paper before the solder job.

If I just need a clevis on one end and an adjustable length on the other. I will solder a brass clevis directly to the rod on one end and a solder on threaded end on the other end.
Sonic1954 is offline  
Reply Like