Hi all, have replaced the Eflite servos on my CX2 with Multiplex Nano servos (because they are red and look cool!? [8D])
When I first connected them all up, both servos were in reverse (forwards was backwards and left was right etc) so I fiddled with the reverse switches on my Tx until they were correct, now .............. my Q is, when you move your right stick up and down, how many servos move? On mine now both servos move, one pushes and the other pulls, am almost 100% this wasn't the case with the original servos?

Also .......... somewhere else I posted a photo of my heli with a very lightweight canopy from www.bladecx2.com, like this one:

http://www.bladecx2.com/forum/viewtopic.php?t=29

I have completely trashed 2 of these in a week!!! They are excellent, and a lot lighter, but, unless you can fly and are NOT GOING TO CRASH, AT ALL, then stay away until you can, they break like egg shells!!!! The first one was no problem really, but I'd spent about 10 hours painting and applying a very intricate Union jack design to the second one [X(] and it broke like an egg within 2 minutes of me starting my heli, was outside, heli went up and came back down from about 2 feet, landed on it's skids but the canopy shattered, the first did much the same, but from about 60 feet up [8D]

Am going to try the Extreme clear canopy next, will report back.

Meanwhile, servo movement help required please!?

Many thanks!