Tony, Jim and everyone,

Here are some more, note differences in wording (below), colors and placement.

P1 V-Fin Decal (small) on UBF-2 NC 2091K (contrast and brightness adjusted)
P2 V-Fin Decal (small) on UBA NC 12445
P3 V-Fin Decal (small) on CTO NC 280W
P4 Fuselage Logo on JYM NC 991H
P5 V-Fin/Rudder (large) on GXE N 6675K
P6 V-Fin Decal (medium) on UKC NC 14010 (small on YKS-6 NC 16246 in background)
P7 Data Plate - JYM NC 991H
P8 On fuse below rear cockpit, YMF Classic NC 14081

The Logo wording also varied; ( / means start a new line)

1 – The / WACO / Aircraft Co. / Troy, Ohio, U.S.A. (On data plate - JYM, UBF-2, small logo on v-fin – ASO, UBA, UBF-2, SRE, YKC, QCF-2, medium on v-fin - UKC, UEC, large logo on rudder/fin – GXE, small and medium size on vertical fin – UPF-7)
2 – WACO / Airplanes / Troy, Ohio, U.S.A. with "The Advance Aircraft Company" super imposed over them (Fuselage Logo on UBA, JYM, JWM, ATO, CSO, CTO)
3 – WACO / Airplanes (rudder – YKS-7 medium size)
4 – WACO / Classic / YMF-5 (medium, under rear cockpit combing on YMF Classic)
5 – WACO / Classic (decal posted by Skinny Bob)

Not all had decals in both places- example is the UBA, 1 had decals both on the fuse and v-fin, the other only had the decal on the v-fin.