RE: Hangar 9 B-25 ARF: Building and Modifications
Living at 6000 ft here in Colorado and having one of the H9 B-25s that came with the Evo 36s, I decided to test fly the engines in another airframe. I fly an Ultra Stick on skiis during the winter with an Evo 46. I installed a motor mount that the Evo36s fit and yesterday I flew the stick briefly ( temp was falling and begining to snow). The Evolution started right up and ran fine from the start. After tweaking the main needle a little bit I poured the coal to it and the Evo flew the stick rather well. Not the power of the 46 but not a dog either. I only flew it for about 5 minutes but that was long enough to assure me two EVO 36s will fly the B-25. Btw I had an APC 10x6 on it. I'm going to test fly the engine with an APC 10x5 and at Master Airscrew 9x7 three blade also. One of my friends also got the plane with the two free Evo 36s. He's going to use Saitos on his so he gave me his two Evo 36s. I guess I'll be flying four engines on the stick. Life is good!!!!!