Ok, well didnt go perfect, but i had the new MH grips order, well they called and said that they were on back ordered and wouldnt come in until a month or so, well I reordered and heres the list that Iv got, tell me if all this stuff will work together and about the flybar problems with the extended xtreme head, heres the list:

1 x MicroHeli Precision CNC Lower Head (BLUE) - Blade CX (MH-CX002LHB) = $24.99

1 x Extended Alu. Inner shaft (for Blade CX2) (BCX020) = $11.80

1 x MicroHeli CNC Lower Main Blade Grips (BLUE) - Blade CX (MH-CX002BG1) = $29.99

1 x MicroHeli CNC Upper Main Blade Grips (BLUE) - Blade CX (MH-CX002BG2) = $29.99



1 x Xtreme Landing Skid Full set (for Blade CX2) (BCX002) $15.60
1 x Xtreme Graphite Tail boom Kit set (for Blade CX2) (BCX001) $21.90
1 x Xtreme Blade for Lama and CX-1 pair (Upper) (ESL005) $4.00
1 x Xtreme Blade for Lama and CX -1 pair (Lower) (ESL006) $4.00
1 x Sport Canopy /w Decal sheet -Mono Tone (for Blade CX2 / Lama v4) (BCX009)

Will the Xtreme upper head work with the MH grips and is the flybar gunna be a problem, the stiff problem all others have been having, thanks[&o]