I thought my post might have made sense, but apparently not...

There is no dihedral. There is no anhedral. It is a tapered wing. It's fat in the center and get's thinner out towards the tip! Besides the center section with the hatch and sheeting, the wing is completely symmetrical.

It is built flat on the board, meaning the bottom will get further from the building board towards the tip. The top of the wing will get closer.

YOU ARE BUILDING THE WING UPSIDE DOWN. The sheeting in the center is on the BOTTTOM of the wing. The hatches are on top.

Go back and read the isntructions a couple more times, Jeff did an awesome job with them...

Got ya this time Chuck! I don't need no stinkin' manuel...