I"ve been working with my axe cp now for about 3 weeks have replaced several parts from crashes main blades x3,mainblade grips x1 mainbladegrip shaftx1, flybar x1 flybar holder x2 slidex1 center hub x1. The stock 10.8 nimh battery is crap, and I see they now have the axe cp with the lipo batt instead of the nimh, which kinda sucks since for those of us that bought one with the nimh battery have had to put out alot of money to chnage over to a lipo compared to the 20 dollar differance in the cp and cpl by the time you get the tail from spinning wildly theres not enough power left in the nimh battery to get it light let alone off the ground, I had wrote heli max support in regards the problems of side tilt when trying to get off the ground and fear of trying my mx400 pro since I have had so much diffaculty with the axe cp, they addressed the issues I was having with the axe cp and also stated that the mx400 would of been a better choice to start with instead of the axe since 1 more stable 2 main blade pitch control, 3 larger heli, 4 belt drive tail instead of motor driven tail.
but my electronics for the mx400 don't get here till next week, and I"ll still have to get aq battery for it since the 910 I have for the cp is under the recommended maMPfor the mx400, only thing I don't like on the mx400 is the main blades that come with it they are bals stick build with monokote instead of solid balsa, meaing even a minor blade strike means new blades lolas for cp I"m thinkin of going to all CNC parts , they cost more but they got to hold up better than the plastic stuff that comes on the axe cp, and for the mx upgrading to CF main blades