RCU Forums - View Single Post - Summit III for Pattern?
View Single Post
Old 12-10-2007 | 06:34 PM
  #9  
MTK
Senior Member
 
Joined: May 2004
Posts: 5,386
Likes: 0
Received 1 Like on 1 Post
From: Whippany, NJ
Default RE: Summit III for Pattern?


ORIGINAL: vellum2

Bryan,
I certainly agree with Matt on all accounts. First off, the Summit II is a terrific ship. Don't let anyone tell you different. 13x10 APC is probably a perfect fit provided you clear the pavement!

Joe W.
Joe raises a good point about ground clearance. If the model has trike retracts, the larger diameter props could present a problem for grass fields.

MattK