well parts arivbed yesterday , installed all of em cept CF blades went with the plastic symetrical blades instead, tried a different approach to take off , by bringing the throttle to 50%, turn idle up on, then use positive pitch to lift off, lift off was alot smoother, part I forgot though was to turn the idle up back off lol when I got too close to a fence and not coming away from it fast ebough, I cut the throttle, but forgot the idle up was still on, there fore I need some parts again oopps, all in all damage not too bad just main blade grips and tail stab.
some parts for the mx400 arrived got em installed still waiting on the rest of the electronics (servos and radio). hope they get here soooon lol other than my mistake on the axe cp flyin it yesterday had a nice hover going for about 4 or 5 minutes. at approx 4 feet off the ground