RCU Forums - View Single Post - Electronic Part needs Identification
View Single Post
Old 12-14-2007 | 05:31 PM
  #2  
kgrover
Junior Member
 
Joined: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
From: , VA
Default RE: Electronic Part needs Identification

I am pretty sure these are for flashing wingtip navigation lights. Should be able to use a 9V battery and up to 4 bulbs wired in parallel. 5 V bulbs should be OK. There is probably a control for adjusting bulb brightness somewhere. Check it out and let me know.