Hello All,

I've been intrigued by another RCU member's ideas for an amazingly light, yet strong aircraft made of 1/2" insulation foam and strengthening tubes based off of the Mojo 40. I already contacted Paul Swanson and he said it was fine for me to do. I asked him if I could be a set from him, but he informed me that he didn't sell the plans alone but that I should ask around for someone that would be willing and able to send me a copy of their Mojo 40 plane. If there's enough interest I'll start a build thread. Cool plane. Should come out at about 3 pounds with a 700sq in wing area giving it a wing loading of under 10oz/sq in. It's also pretty indestructible and extremely cheap to build. The whole plane (minus engine and radio) should come in right around $45. The best part about it is that if the epoxyglass tubes don't break, it should only take about $10 to build another one. Most of the original build cost is in paints, glues and bidirectional tape that can be used in many more than one plane.

My point is this, I'd love to get some plans for the Mojo 40 so that I can start this build. Please PM me with information as I'd love to get started soon and am completely serious.