RCU Forums - View Single Post - HL Pershing Problems
View Single Post
Old 12-28-2007 | 09:22 PM
  #8  
swathdiver's Avatar
swathdiver
Senior Member
 
Joined: Mar 2006
Posts: 5,031
Likes: 0
Received 1 Like on 1 Post
From: Port Saint Lucie, FL
Default RE: HL Pershing Problems

Probably blew the right forward transistor. Pulls the tracks off and test again. Then open the tank up and check all the connections, especially the 4 wires attached to the board from the motors. If nothing is amiss, fire up the soldering iron and drop in your spare board. You do have a spare board, don't you?