RCU Forums - View Single Post - where to get a co-plot
View Single Post
Old 01-01-2008 | 01:23 AM
  #3  
AirmanBob's Avatar
AirmanBob
My Feedback: (14)
 
Joined: Jun 2004
Posts: 492
Likes: 0
Received 0 Likes on 0 Posts
From: Boise ID
Default RE: where to get a co-plot

You Blade CP or CP Pro is a CCPM heli so you would have to
use the FS8 version of the FMA co-pilot.

The FS8 has a built in FM receiver plus all the mixing required
for CCPM. It costs about $105 bucks. Its a tiny bit heavier than
the CPD4 co-pilot but since you have to remove your stock
receiver it will probably all even out.

Some guys think you have to have a PCM receiver in a heli but
I've been running an FM receiver (Futaba) for a year and I've
never had any glitch's or any other problems. I prefer FM....

Here's thier web site: http://www.fmadirect.com/

Good Luck,
Bob