RCU Forums - View Single Post - H9 TCraft Elevator Probs
View Single Post
Old 04-10-2003 | 11:25 PM
  #8  
Schubox
Member
 
Joined: Feb 2003
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
From: Sioux Falls , SD
Default H9 TCraft Elevator Probs

Tod don't know about the hover just took it for a trial spin, and it was fairly windy. The prop I chose is an apc 16-10 and seems to work great, will probably move to 18-6 eventually. I did stay with the fuel tank they sent, but wouldn't hurt to move up to a little bigger one as I would estimate flight time to be about 12 min. The elevator setup seems to be working just fine, but leaves me a little leary, for all that strain on one little servo.

Jason