I hope this is the correct forum. I recently purchased a Futaba 9CAP Super. I am having a problem with programming in flaps for a BTE FlyingKing. I had managed to get the flaps working with switch C, but made some other changes and now, no flaps. Servos are working, correctly pinned together. I have Flaperons active (if not, only 1 aileron works).I tried going to Program C which controls flaps and elev. I understand I want a bit of down E with flaps. That makes sense. I have flaps on CH 6 as directed in the manual. No activation. I have been playing with many combinations....I have even "rebooted" the said plane under 'execute' and tried starting over. No luck. So, if anyone out there has a solution to what I am NOT doing or what I am doing WRONG it would be very helpful. Please e-mail a response to me: [email protected].
Many thanks.
Tim