I was scratching my head also. I realize that this is not a big deal. I mean 1. It's easy to fix and 2. This ain't no pattern ship. I't just has me baffled. On another note. 1st wing is complete. Weight is 1lb 9OZ. with hinges and aileron. 2nd wing is layed up. LE sheeting is installed on the bottom of th wing. All I have left is sheeting the servo bay and the Ail. and I can flip this baby over. At this point outssider, on the bottom of my wing, the wing tapers all the way from R1 to R10. It doesnt level out at R3. I don't know what it will look like when I flip it over. I am going to post pics of what's there and how I fix it. Also I think I'll post pics of the reinforcements I used for the single servo setup. Just so Mike can look and give me the OK. Should be finishing the wing by Sunday night some time.