RCU Forums - View Single Post - Axe Cp E-Board/power loss/settings

01-20-2008 | 07:29 PM

#1

Kaptain Chaos

Senior Member

Joined: Jan 2008

Posts: 117

Likes: 0

Received 0 Likes on 0 Posts

From: Winnipeg, MB, CANADA

Axe Cp E-Board/power loss/settings

I bought a Axe Cp off a guy from ebay, it was supposed to fly right out of the box which of course it didn't. It came with a broken tail motor mount a cooked tail motor so I replaced the tail motor mount and the tail motor, in inspecting the wire to the motor I noticed a splice in the red power cord which was taped up with electrical tape, would this have anything to do with the way my heli fly's I have a pic and video I will add.
I tried some adjustments myself on the Left/Right Bias -[silver screw] on the e-board due to the tail always drifting but I cannot seem to get it, and I think from the power wire being slit the tail motor might be giving me some power loss every now and then watch the video and tell me what you think?
Here is a image of my eboard -

When flying I am always compensating for the tail drifting to the right.
video of the axe flying with a Lipo -Click here to watch AxeCP-Tail-motor-or-eboard

Reply Like