RCU Forums - View Single Post - Expos for 3D flying
View Single Post
Old 01-23-2008 | 06:13 PM
  #15  
FLYMIKE's Avatar
FLYMIKE
 
Joined: Jun 2006
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
From: Salt Lake City, UT
Default RE: Expos for 3D flying

I have been using 20% expo with 45 degrees on all surfaces....And no right thrust with the motor, centered on the firewall, everything centered on my EXflight Yac 74'' and it fly's awesome....0% on rudder.... Kinda weird because lateral balance is off on the ground but in the air it fly's straighter then any plane I have had before...