RCU Forums - View Single Post - CP Pro - Warning! - Ball Joints!!
View Single Post
Old 01-27-2008 | 09:15 AM
  #5  
scale_edge's Avatar
scale_edge
Senior Member
 
Joined: Jan 2008
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
From: , AL
Default RE: CP Pro - Warning! - Ball Joints!!

i agree, the tx i got with mine originally had a direct short in the throttle trim pot and it smoked itself as soon as i turned it on, so they couldn't have used it to test fly it - they finally sent me a new one and another cp as well, so i couldn't complain, but there's no way they could have test flown it with that tx - must be one test station on the assy line where they plug it in and see if the motor turns or something

edge