RCU Forums - View Single Post - Using a Futaba TX w/ the cp pro
View Single Post
Old 02-01-2008 | 05:32 PM
  #9  
mosiris
Member
 
Joined: Jan 2008
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
From: Auburn, AL
Default RE: Using a Futaba TX w/ the cp pro

Atzanik ...

Your TX must be newer than mine or I am just reading wrong.


EPA Ch1/2/3/4/6=down 100%
EPA Ch5= up 100%
I don't see this setting in on my TX.

TRIM Ch1=0, Ch2=0, Ch3=+120, Ch4=0
I am thinking that would be STRM on my TX.

N-TH 0, 25, 50, 75, 100
N-PI 60, 68, 76, 82, 90
I-TH 100, 75, 50, 75, 100
I-PI 0, 25, 50, 75, 100

This stuff always confues me, but I thought the t6xh only had a 3 point curve.

Again, thanks for all the help !

- Mike