I found a few more pics of some older mods/tests. At one time we played around with moving things around on the chassis and tryed a few diffrent ideas with the radio trays which did kind of work out nicely. We also tryed out locking up the stock ball diffs by just bolting through them... after that most guys were busting and twisting the factory dog bones like they were going out of style. I even tryed the thick EK-4 bones and some Ofna dog bones and twisted the crap out of them too ( those EK-4 bones twisted like a candy canes lol)... thats when we just started pegging the diffs instead after that test and even the stock dog bones held up fine after that. The stock dog bone ends are just a bit smaller than most of todays 8scale bones, all we did was use a 5/16 bur on a high speed hand air grinder drilled into the cups to open them up just a bit, it worked great.

BTW, I remembered to take some tranny gears with me to the shop and made a few quick single rubber test molds, if they work out I should be able to pour some test gears monday night and will post some pics then.