RCU Forums - View Single Post - axe cp thread
View Single Post
Old 02-07-2008 | 05:07 PM
  #1787  
mikezell's Avatar
mikezell
Junior Member
 
Joined: Jan 2007
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
From: Cheshire, CT
Default RE: axe cp thread

I got tired of wrestling with the aft canopy mounts on my axe, so I glued 8mm rare earth magnets to the mount rod and the canopy.

So far it works very well, the magnets hold it tightly in place.

I left the front mount the way it was.

The canopy is tilted forward, this allows room for a larger battery.

[link=http://www.rcuniverse.com/gallery/galleryItem.cfm?itemID=129798&dummy=7624.492367122 484&opener=/gallery/galleryCat.cfm%3FmemberID%3D318108]magnets attached[/link]
[link=http://www.rcuniverse.com/gallery/galleryItem.cfm?itemID=129800&dummy=7809.496585462 528&opener=/gallery/galleryCat.cfm%3FmemberID%3D318108]magnets on mount rod[/link]
[link=http://www.rcuniverse.com/gallery/galleryItem.cfm?itemID=129801&dummy=3959.908619270 0615&opener=/gallery/galleryCat.cfm%3FmemberID%3D318108]canopy angle[/link]