I just received a Redcat Tornado, and was testing out the servos/controller before I do a break-in. I do not get any response from the car when I move the steering wheel or throttle. I have all 3 lights (red/yellow/green) on the transmitter, so I know that I have power at the transmitter. On the car, it has 4 brand new AAs in it, and the servos twitch a hair when I turn the car on. Now, I did notice that my transmitter has a T-10 on the crystal and it says 27.195 and the receiver in the car shows R-6 and has 27.095. Is this difference in frequencies causing the problem? I'm hoping that this was just a mix-up from the factory and that it's not something wrong with the electrical system.