T_ _ _ Tedskies Glad to hear of all the progress,,, thats great!!! and did I hear something about 3 - 5 wings on the 150 sized. well there it is folks,, a new challenge is brought about. Now the pressure can finally be taken off me, looks like the next feat will be the Quad or Quin T _ _ _ T I think you should try it, if you get started right after the laser is completed that way we can all watch 3 wings crumble in the sky and then go right to 4 then 5,, hmmmmm how many wings will a T_ _ _ T hold[:-][>:] ask mr owl, he is much wiser then I[8D]
and no work was done tonight as I took my wife to her curling club, seeing we got smashed with a blizzared right as she was suppose to leave. so I took the night off and watched some good curling action.

Skukreja, Thanks for the tips, I thought it would be extremely twitchy, and I have full flaperons in both directions so I can use them either way spoilers or flaps. I'm going to go watch the Utube clips right now, my CG is about 4.75 on the original so its coming forward maybe an inch for each wing, and my wing struts were designed to give me 2 inches total from the bottom wing to the top about 1 inch forward each wing I'm hoping that was a good number to go with,, so I should probably bring the CG to about 2 - 3 from the leading edge, I think Binky99 has a $5.00 bet on 2.5 I'm almost ready to send him the $5.00 as by the way your talking he may be right on the money. there has been talk about flooring it for the take off or a nice gentle acceleration, we are leaning towards the floor it and go method, that way there should be plenty of debris and action for the video.. LOL,, well I'll be back on the project tomorrow night, I'm hoping to be finished completely in the next 3 weeks, I need 2 weeks from tomorrow to get paid again to buy 3 - 5 rolls of the mono-cote needed. LOL