hope someone can help
I have been trying to get the eccpm setup on my mini titan E325 ,and I can't get it right. I have a JR 6102tx and 770 rx I put JR small heli servo set 3 ds285 and the 3400 for tail .I got it all setup and leveled the swash and it all looked pefect ,but when I give full throttle the swash moves up witch is -pitch and when I change the servos to get the swash to move down + pitch I can get left and right good but fro and aft are wrong ,I can get for and aft right then left and right are wrong. I know that it must be some simple fix but being new to eccpm I can't get it


If you can help thanks rvmach50