Ive set my dual rates for the first time today i have a dx7 radio and im setting up my eflite mini pulse ive got a few questions : on travel adjustments i have my L aileron at 130% and my R aileron at 135% my elevator was ok at 100% L and R and my rudder was L 100% and R 105% is it ok to have different settings or should each rudder ,aileron and elevator be the same i set my expo to -40 on low rates should the hi rates be set at -40 also and last everywhere i read it says to rebind after setting the rates do i need to unhook all servos from my receiver to rebind or is there a way to do it with everything hooked to the receiver?