I had one of these same kits delivered from tower a few weeks ago. I have not yet started mine, I was also happy it did not have luan doorskin parts in the box. I also pulled the ABS parts from the box and threw them in the recycle bin.

Although I have built many kits over the years, I have never skinned foam cores before. I am still on the fence as to whether a vaccum bag setup is the way to go for this project. I really don't want to mess up on my first foam core wing skinning job.

Both FG spaecialties, and stans list a cowl for this kit.

I will probably use a 50cc gasser in my plane, although I have a new MOKI 2.1 that would work well also.


Mike
.