RCU Forums - View Single Post - Towerhobbies Kaos conversion
View Single Post
Old 03-06-2008, 07:27 PM
  #8  
_Tommy D
My Feedback: (20)
 
_Tommy D's Avatar
 
Join Date: Feb 2004
Location: East Islip, NY
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Towerhobbies Kaos conversion


ORIGINAL: Ranscuda

Tommy,hope you see this my Kaos is at 5lbs i put a turnigy 4260/06 60esc 3s3700mah lipo taxis great but will not lift off 13 " prop not fast enough to lift off Help please Randy
Hi Randy

My first request would be for you to obtain a watt meter and see just how much power your combo is making. Trying to diagnosis the "problem" without one is very difficult. If your Kaos is 5lbs ready to fly I would shoot for 500W to start. Yes it will fly on less, but I don't suppose it will be very much fun.

I don't know an awful lot about your motor honestly. Is [link=http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6231]this[/link] one it? If the motor specs out to 500/600KV I think your being overally optimistic trying to fly the model on only a 3S pack. To make my 500W goal your pack would have to supply say 50A @10V! Somehow I doubt thats going to happen.

Let me know how you make out.

Tommy D