RCU Forums - View Single Post - EXCEED RC MOTOR
View Single Post
Old 03-25-2008 | 09:50 PM
  #12  
yadac123
 
Joined: Sep 2005
Posts: 2,121
Likes: 0
Received 1 Like on 1 Post
From: , CA
Default RE: EXCEED RC MOTOR

I need the original order number on this one. Make sure when your blades are blocked you don't apply trottle.

Andy
ORIGINAL: muscat69

I purchased 2 Eagle 50s from x-heli.com and both of the original motors failed within 2 days of each other. I purchased another motor from them and one from e-flight blade cp and took the stickers off and put a heat sink on them and they seem to be ok.one of my helis had a 9 tooth gear and the other one had a 10 tooth.will Exceed replace my burnt up ones? Maybe Andy can tell me.