I was looking at the BobCat Stab plan last night, and was wondering if there is too much room for interpretation on the elevator travel.

It reads
"Elevator Travel:
1 3/4" up and down."

I was wondering if some people were thinking that this meant that the elevator was to have 1 3/4" total travel. Instead of 1 3/4" up and 1 3/4" down.

Looking at everyone's ATV settings was what lead me to think this.

I did a little drawing and would like to know if this is what everyone's elevator looks like at full deflection. And as I said before it has been my experience that 140-150% ATV is necessary to achieve what is shown in my drawing.